Remington 700 Extractor Riveting tool for all calibers.

Extractor Riveting Tool for Remington 700, All calibers. Precisely secure rivet style extractors into the bolt face of any caliber using these specially designed pliers. These special clamping style pliers allow you to accurately position the extractor and keep the extractor in position while the rivet is expanded and the extractor is securely crimped into the recess of the bolt face.

Part# ERT-111
$69.95

Remington 700 Trigger Guard Bedding Blocks

No more damaged finish trying to remove the factory trigger guard from a bedded stock. No more trying to clean epoxy and mold release from the rough surface of a factory trigger guard. Our bedding blocks leave the bedded surface of your stock looking as if it just came out of a precision mold. Because these trigger guards are made extra tall you never have to worry about the factory trigger guard being slightly below the stock’s finished surface and what to do with the epoxy that runs over the top.

$199.95 Complete set Remington 700 Long and short action BDL and Remington 700 ADL

$94.50 Remington 700 BDL Long action only, (does not include ADL)
$94.50 Remington 700 BDL Short action only, (does not include ADL)
$22.95 Remington 700 ADL long or short action

Pillar Drilling jig for Remington 700

$249.95   for the complete set for 700 LA, SA ADL and BDL.
$139.95   for specific models such as 700 ADL short action

It has never been easier to drill a Remington 700 stock to accommodate bedding pillars than with our Pillar Drilling Jig. You no longer need a milling machine or even a drill press. Hardened steel drill guide bushings are held in place by a round bar the same diameter as a Remington 700 receiver. This bar is accurately positioned on the top of the stock’s inletting using a special guide pin that pilots off of either the front or rear trigger guard screw hole. The top bar with the drill bushings are held firmly in position by a screw passing thru the top bar and into a special platform machined to fit the bottom of the stock. Once the drill jig is firmly in position the hardened drill bushing will not allow the special drill bit supplied with each kit to wonder from the correct path. It takes literally seconds to accurately drill any Remington 700 stock to accept bedding pillars using only a hand drill.

Click here to view a Video of the stock drilling jig in action

Piloted counter bores: $57.95

When boring the stock to accept the aluminum pillars it is easy to get good results every time when using a piloted counterbore. There are 2 sizes available 9/16 diameter for boring the stocks of Winchesters and Howas and 5/8 diameter for all Remingtons. To best fit the holes of the trigger guard screws each counterbore comes with 2 pilots, 9/32 and 5/16 diameters.

FUMED SILICA $9.00

The best method of thickening epoxy by far is through the use of Fumed Silica. There are times when bedding a stock that you need the epoxy to stay exactly where you put it. Fumed silica can be added to Pro-Bed 2000 to such an extent to make the epoxy as thick as dough with absolutely no negative effects on the finished product. The thixotropic properties of the Fumed Silica allow for ease of mixing with the epoxy.

Mold Release Wax, 1 Pint can $17.95
The mold release agent can make or break a bedding job. Our mold release is a high grade parting compound designed for the composite industry. It is a Carnauba based wax that is applied and then buffed to a sheen similar to waxing a car. It is the best product that we have found for this application. When the aerospace industry makes carbon fiber wings and other composite parts they use this stuff to depart their molds.

We are proud to have our products available from the following distributors

IN THE USA

Brownell's distributes our: Benchrest Followers Bedding blocks and Stock drilling jigs